MagicLock ML22FOX Safety and installation instructions
13
Please observe the following instructions:
z When working on the following lines, only use insulated cable lugs, plugs
and sleeves.
– 30 (direct supply from positive battery terminal)
– 15 (connected positive terminal, behind the battery)
– 31 (return line from the battery, earth).
Do not use terminal strips.
z Use a crimping tool to connect the cables.
z Screw the cable for connections to wire 31 (earth)
– Screw on the cable using a cable lug and serrated washer with one of
the vehicle's earth bolts
– Screw the cable to the bodywork using a cable lug and a self-tapping
screw
Ensure that there is a good earth connection.
If you disconnect the negative terminal of the battery, all data stored in the
volatile memories will be lost.
z The following data must be set again, depending on the vehicle equip-
ment options:
– radio code
– vehicle clock
–Timer
– On-board computer
– Seat position
You can find instructions on making these settings in the owner's manual
of your vehicle.
Observe the following installation instructions:
z Note the manufacturer's instructions if the vehicle has side airbags in the
doors.
z Secure the parts installed in the vehicle in such a way that they cannot be-
come loose under any circumstances (sudden braking, accidents) and
cause injuries to the occupants of the vehicle.
z To prevent damage when drilling make sure there is sufficient space on
the other side for the drill head to come out.
ML-22-FOX.book Seite 13 Mittwoch, 15. März 2006 3:40 15
To Next Page
Loading...