What to do if my Wagan iOnBoost V8 Torque Remote Starter shows a solid red light with a beep (no green)?
If your Wagan Remote Starter displays a solid red light with a beep (but no green light), it indicates a short-circuit. Disconnect immediately and follow the proper connection procedure again.
What to do if my Wagan iOnBoost V8 Torque Remote Starter shows a solid red light with pulsing beep (no green)?
If the Wagan Remote Starter is showing a solid red light with a pulsing beep (and no green light), it means there's reverse polarity. Disconnect immediately and follow the correct connection procedure again.
Why is my Wagan Remote Starter showing a solid red light (no green)?
If your Wagan Remote Starter shows a solid red light (with no green light), it means the iOnBoost charge is too low for jumpstarting. The iOnBoost needs to be recharged.
What to do if my Wagan iOnBoost V8 Torque shows a solid red light with a fast beep (no green)?
If your Wagan Remote Starter is showing a solid red light with a fast beep (and no green light), it indicates over-heating. Disconnect the unit and allow it to cool for 10 minutes.
What to do if my Wagan iOnBoost V8 Torque shows a solid red light with a slow beep (no green)?
If your Wagan Remote Starter shows a solid red light with a slow beep (and no green light), it means there's a reverse charge. Disconnect the iOnBoost from the vehicle battery immediately.
Read and understand all instructions before use to prevent injury, electric shock, or fire.
Guidelines for safe operation, child supervision, environmental hazards, and jewelry.
800 peak amps jump starter, 31.0 Wh battery, heavy-duty clamps for vehicles.
Two USB ports with 2.0A output, including one rapid-charge port.
Lists protective features like reverse polarity, short-circuit, overheat, and overload protection.
Details battery type, capacity, peak amps, ports, temperatures, and recharging time.
Identifies key components like power button, USB ports, flashlight, and jumper terminals.
Instructions for fully charging the unit before first use and subsequent recharges.
Warnings and step-by-step procedure for jumpstarting a vehicle safely.
Explains warning light combinations and their solutions for jumpstarting.
Instructions for operating USB ports and the LED flashlight.
Guidance on responsible disposal of the product and its battery.
General| Product Type | Jump Starter |
|---|---|
| Peak Amps | 800A |
| Battery Type | Lithium-Ion |
| USB Ports | 2 |
| USB Output | 5V/2.1A |
| DC Output | 12V |
| Peak Current | 800 Amps |
| Included Accessories | USB Charging Cable |
To Next Page
