Wagan iOnBoost V8 Torque User Manual

iOnBoost
™
V8 Torque by Wagan Tech
®
USING THE USB PORTS
If the charge in the iOnBoost is low, the USB port will shut off to prevent damage to the
iOnBoost. Recharge the iOnBoost as soon as convenient.
1. Connect the USB device to the iOnBoost with a user-supplied cable.
2. Press the Power button to activate the USB ports.
3. When your mobile device is fully charged, disconnect your device from the iOnBoost.
LED FLASHLIGHT
If the charge in the iOnBoost is low, the light will shut off to prevent damage to the iOnBoost.
Recharge the iOnBoost as soon as convenient.
1. Hold down the Power button for 3 seconds to turn on the light.
2. Short press to cycle through the lighting modes: 1=strobe, 2=S.O.S., 3=off or long press to
turn off from any mode.
3. Recharge battery as soon as convenient.
PROPER DISPOSAL
• This product has no consumer serviceable parts.
• Do not attempt to remove or replace the battery used in this device. When
the battery has reached the end of its lifetime, please take the entire unit to a battery
recycling facility.
Looking for
dependable battery chargers & jump starters?
Rely on Wagan for quality and long-lasting products.

Wagan iOnBoost V8 Torque Specifications

General

Brand	Wagan
Model	iOnBoost V8 Torque
Category	Remote Starter
Language	English