EasyManua.ls Logo

WAGNER CONTROL PRO 190 - User Manual

WAGNER CONTROL PRO 190
28 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
0917 • Form No. 0580055D
CONTROL PRO
™
Owner‘s manual • GuIDe D‘uTIlIsaTIOn •
MANUAL DEL PROPIETARIO
READ THIS MANUAL FOR COMPLETE INSTRUCTIONS
FRANÇAIS  P. 24
ESPAÑOL  P. 48
wagner-group.com
EN
ES
F
Model 150
Model 170
Model 190

Table of Contents

Questions and Answers

  • S
    sharonzimmermanJul 25, 2025
    What to do if my WAGNER Paint Sprayer stops spraying?
    • M
      Michael HollandJul 25, 2025
      If the spray pattern becomes distorted or stops spraying completely while the gun is triggered, it could be due to a clogged spray tip or inlet filter. First, lock the spray gun and rotate the spray tip 180 degrees. If it's hard to rotate, relieve pressure by slowly turning the PRIME/SPRAY knob to PRIME, unlock the spray gun, and squeeze the trigger while pointing at scrap material. Release the trigger, lock the gun, and try rotating the tip again. Also, check the inlet filter; remove it from the suction tube and clean it with warm, soapy water for latex materials or mineral spirits for oil-based materials, then snap it back into place.
  • C
    Christopher BeasleyAug 8, 2025
    How to fix a clogged spray tip on a WAGNER CONTROL PRO 190 Paint Sprayer?
    • U
      uhamiltonAug 8, 2025
      If the spray pattern becomes distorted or stops spraying completely while the gun is triggered, the spray tip could be clogged. To fix this, lock the spray gun, then rotate the spray tip 180 degrees from its current position. If the spray tip is difficult to rotate, relieve pressure by slowly turning the PRIME/SPRAY knob to PRIME, unlock the spray gun, and squeeze the trigger while pointing it at scrap material. Release the trigger, lock the spray gun, and try rotating the spray tip again.

Summary

Important Safety Information

Explanation of Symbols

Grounding Instructions

Provides essential guidelines for properly grounding the equipment to prevent electrical shock.

Safety Hazards and Prevention

Explosion or Fire Hazards

Addresses risks from flammable vapors and solvents, emphasizing ventilation and static control.

Injection Injury Hazards

Warns about high-pressure paint streams piercing skin, potentially causing serious injury or amputation.

Hazardous Vapors

Highlights dangers of inhaling or contacting paint/solvent vapors, requiring respiratory protection.

Assembly Guide

Tools and Setup

Hose Connection

Instructions for attaching the spray hose to the pump and spray gun correctly.

Before You Begin Operation

Spray Gun Trigger Lock

Explains how to engage and disengage the safety lock on the spray gun trigger.

Pressure Relief Procedure

Details the critical steps for safely releasing system pressure before maintenance or shutdown.

Loading Material and Priming

Preparation and Material Loading

Spraying Technique

Material Delivery to Gun

Practice Spraying

Tip and Material Selection Guide

Spray Pattern Adjustment

Spraying Troubleshooting

Clearing a Clogged Spray Tip

Steps to resolve issues where the spray tip becomes blocked during operation.

Cleaning the Inlet Filter

Procedure for cleaning the inlet filter to ensure proper material flow.

Storage Procedures

Short-Term Storage

Long-Term Storage Preparation

Cleaning and Maintenance

General Cleaning Notes

Cleaning the Inlet Valve

Cleaning the Outlet Valve

Troubleshooting Guide

WAGNER CONTROL PRO 190 Specifications

General IconGeneral
BrandWAGNER
ModelCONTROL PRO 190
CategoryPaint Sprayer
LanguageEnglish

Related product manuals