EXPLOSION PROTECTION IDENTIFICATION
X MARKING:
The spray gun corresponds with EX II 2G X and is, in accordance with
Directive 2014/34/EU, suitable for use in explosion-hazardous areas—as
of type Zone 1. Under certain circumstances, the unit itself may cause the
Zone 1 condition to be in eect.
Any static-electricity discharge from the spray gun is to be diverted to the
grounded high-pressure pump via the conductive high-pressure hose as
stipulated.
The maximum surface temperature corresponds to the permissible
material temperature. This and the permissible ambient temperature can
be found in the Technical Data.
RESIDUAL RISKS
Risk Source / Cause Impact Preventative
measures
Can occur
during:
To Next Page
Loading...
Need help?
General
