English
4
Assembly
Before you begin:
NEVER point the spray gun at any
part of the body.
Aligning the suction tube:
1. Align the arrow on the spray
gun with the “unlock” symbol
on the spray gun handle.
If you are going to be spraying in a downward
direction, the angled end of the suction tube
should be pointing toward the front of the gun.
If you are going to be spraying in an upward
direction, the angled end of the suction tube
should be pointing toward the rear of the gun.
2. Insert and twist the spray gun
into the handle toward the
“lock” symbol on the spray
gun handle. The tab below
the trigger will lock the two
pieces into place.
3. Insert the air hose tightly into the connections
onto the spray gun (a) and the turbine (b). The
connections can be positioned as desired.
Note: By pointing the
suction tube in the
proper direction, you
will not have to rell
the container as often.
1 2 3
(a)
(b)
To Next Page
Loading...
