3
GA 4000ACIC
OPERATING MANUAL
EDITION 06/ 2011 PART NO. DOC2312956
Contents
1 ABOUT THESE INSTRUCTIONS 5
1.1 Languages 5
1.2 Warnings, notes and symbols in these instructions 5
2 GENERAL SAFETY INSTRUCTIONS 6
2.1 Safety instructions for the operator 6
2.1.1 Electrical equipment 6
2.1.2 Personnel qualifi cations 6
2.1.3 A safe work environment 6
2.2 Safety instructions for staff 6
2.2.1 Safe handling of WAGNER spray units 7
2.2.2 Earth the unit 7
2.2.3 Material hoses 7
2.2.4 Cleaning 8
2.2.5 Handling hazardous liquids, varnishes and paints 8
2.2.6 Touching hot surfaces 8
2.3 Correct use 8
2.4 Use in an explosion hazard area 9
2.4.1 Correct use 9
2.4.2 Explosion protection identifi cation 9
2.4.3 “X” Special notes 9
2.4.4 Safety instructions 9
3 GUARANTEE AND CONFORMITY DECLARATIONS 10
3.1 Important notes on product liability 10
3.2 Guarantee claim 10
3.3 CE-Conformity 11
3.4 National technical specifi cations 11
4 DESCRIPTION 12
4.1 Field of application, using in accordance with the instructions 12
4.1.1 Processable materials 12
4.2 Delivery scope 12
4.2.1 Type description 12
4.2.2 Overview 13
4.2.3 Standard variant 14
4.2.4 Supplementary components 14
4.2.4.1 Ground plate 14
4.2.4.2 Air caps 15
4.2.4.3 AirCoat fl at jet nozzle ACF3000 15
4.2.4.4 AirCoat round jet nozzle ACR3000 15
4.2.4.5 Material connections 16
4.2.4.6 Air connections 16
4.2.4.7 Lock pin 16
4.3 Data 17
4.3.1 Technical data 17
4.3.2 Measurements and connections 18
4.3.3 Materials of paint wetted parts 19
4.4 Functional description 20
4.4.1 Design of spray gun 20
To Next Page
Loading...
Need help?
General
