To Next PageTo Next Page
Need help?Do you have a question about the WAGNER HC 940 and is the answer not in the manual?
General| Weight | 5.5 kg |
|---|---|
| Device Type | Airless |
| Voltage | 230 V |
| Frequency | 50 Hz |
| Max Viscosity | 100 DIN |
| Max. delivery rate | 2.3 l/min |
| Max. Power Consumption | 940 W |
Airless units develop extremely high spraying pressures, posing a severe injection risk.
Rules for work places covered by explosion protection regulations.
Avoiding sources of ignition during spraying.
Warning about injection injuries from the spray jet.
Securing the spray gun when not in use.
Necessity of respiratory protection when spraying solvents.
Permissible operating pressure for spray guns and hoses.
Risks of sparks or fire due to electrostatic charging.
Importance of adequate ventilation when spraying in rooms.
The object to be coated must be earthed.
Safety precautions when cleaning the unit with solvents.
Warnings against using high-pressure cleaners.
Safety for work on electrical equipment.
Precautions when working on electrical components.
Details the Airless spraying method and its advantages.
Table detailing technical specifications for gasoline HC units.
Table detailing technical specifications for electric HC units.
Explains the technical construction and operation of the unit.
Safety and operation of the pump's swivel mechanism.
Steps to connect the high-pressure hose and spray gun.
Steps to adjust the pump's position for operation.
Steps to start operation with coating material.
Troubleshooting common issues with the gasoline engine.
Troubleshooting common issues with the material feed pump.
Troubleshooting common issues with the electric motor.
Troubleshooting common issues with the hydraulic motor.
Lists conditions that void the warranty.
