EasyManua.ls Logo

WAGNER HC 960

WAGNER HC 960
140 pages
Go to English
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Ausgabe 11 / 2013 0528100L
Edition
Edizione
HC 920 • HC 940 • HC 960
HC 940-SSP • HC 960-SSP
®
I
GB F
D
Betriebsanleitung
Operating manual ......... p. 30
Mode d’emploi .............. p. 60
Istruzioni per l’uso ........ p. 90
Airless Hochdruck-Spritzgerät
Airless high-pressure spraying unit
Groupe de projection à haute pression
Impianto per la verniciatura a spruzzo ad alta pressione Airless

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the WAGNER HC 960 and is the answer not in the manual?

WAGNER HC 960 Specifications

General IconGeneral
BrandWAGNER
ModelHC 960
CategoryPaint Sprayer
LanguageEnglish

Summary

Safety Warning and Procedures

Danger of Injection Injury

Describes high-pressure spray hazards and immediate medical treatment.

Pre-Operation Checks

Essential points to observe before starting the unit.

Work Interruption Procedures

Safety rules to follow during breaks or before maintenance.

Safety Regulations for Airless Spraying

Fire and Explosion Hazards

Covers flash points, explosion protection, and ignition sources.

Personal Safety and Operation

Details injection injury prevention, gun safety, recoil, and protective measures.

Installation and Unit Safety

Addresses safe installation, ventilation, earthing, and cleaning precautions.

Unit Description and Coating Materials

Gasoline Unit Technical Specifications

Electric Unit Technical Specifications

Starting Operation Procedures

Material Feed Pump Swivel

Instructions and safety for adjusting the pump's position.

Changing Pump Position

Step-by-step guide for swiveling the pump to different positions.

Connecting Components and Initial Setup

Hose and Gun Assembly

Steps for connecting the high-pressure hose and spray gun.

Initial Unit Start-up

Gasoline Engine Preparation

Steps for filling oil and fuel for gasoline engines.

Initial Cleaning Cycle

Procedure for flushing the unit with a cleaning agent before first use.

Operation with Coating Material

Steps to prepare and start the unit for spraying.

Spraying Technique and Hose Handling

Work Interruption and Unit Cleaning

Procedure for Work Interruption

Steps to safely pause operations, including pressure release.

Filter Cleaning Procedures

Detailed steps for cleaning suction and high-pressure filters.

Spray Gun and Filter Cleaning

Troubleshooting Guide

Gasoline Engine Issues

Possible causes and solutions for gasoline engine malfunctions.

Electric Motor Issues

Possible causes and solutions for electric motor malfunctions.

Hydraulic Motor Issues

Details problems with the hydraulic motor and their remedies.

Material Feed Pump Troubleshooting

Pump Ejection Problems

Addresses issues with insufficient or uneven material ejection.

Pump Stroke and Pressure Issues

Covers piston rod movement and low spray gun pressure.

Maintenance and Servicing

General Servicing Recommendations

Outlines routine checks and annual service requirements.

Hydraulic Oil Level Check

Procedures for checking the hydraulic oil level in the tank.

Hydraulic Oil System Maintenance

Steps for changing hydraulic oil and filter periodically.

High-Pressure Hose Inspection

Guidance on visually inspecting the high-pressure hose for damage.

Accessories and Spare Parts

Material Feed Pump and Shovel Valve Parts

High-Pressure Filter Spare Parts

Hydraulic System Spare Parts

Unit Motor Spare Parts

Electrical Schematics

Appendix and Accessories

Airless Tip Application Guide

Airless Tip Application Guide (Continued)

Professional Finishing Warranty

Product Liability and Warranty Details

Related product manuals