7
Instructions
TO OPERATE:
Press and release the ON
button.
Take readings by press-
ing the bottom of the
meter to the wood
surface. The meter will automatically
shut off after 60 seconds of inactivity.
1. Read the % MC on the panel meter
(Figure 1). If the wood is Douglas
Fir, the scale reading indicates the %
MC in the wood.
2. If the wood is not Douglas Fir, you
must make a species correction.
SPECIES ADJUSTMENT TABLES are
provided. When measuring a species other
than Douglas Fir, use the tables to locate
your species and corresponding meter
reading.
To Next Page
Loading...
