9
NEVER calibrate your moisture meter to
this device.
Additional Instructions for Model L607
ONLY
WATERBORNE FINISHES
can be quickly scanned between
applications.
1. Simply check the base moisture con-
tent of the wood before applying a
waterborne nish.
2. After application of nish, scan rep-
resentative area of the wood and note
the elevated moisture content.
3. Re-scan at regular intervals until the
moisture reading once more drops to
the base level rst recorded before
applying nish.
4. When the reading matches the base-
level reading, the wood is ready for
recoating.
To Next Page
Loading...
