11
40 ccm - 300 ccm.
SERVICE MANUAL
EDITION 01/2012 PART NO. DOC367866
Cleaning
If there are deposits on the surfaces, the unit may form electrostatic charges. Flames or
sparks can form if there is a discharge.
Remove deposits from the surfaces to maintain conductivity.
Use only a damp cloth to clean the unit.
Surface spraying, electrostatic
Do not spray unit parts with electrostatic (e.g. electrostatic spray gun).
2.4.4 GERMAN REGULATIONS AND GUIDELINES
a) BGR 500 Part 2, Chap.2.36 Working with liquid ejection devices
b) BGR 500 Part 2, Chap.2.29 Using coating materials
c) BGR 104 Explosion protection rules
d) TRBS 2153 Avoiding ignition risks
e) BGR 180 Setting up for cleaning with solvents for cleaning workpieces with
solvents
f) ZH 1/406 Guidelines for liquid ejection devices
g) BGI 740 Painting rooms and equipment
h) Betr.Sich.V. Plant Safety Ordinance
Note: All titles can be ordered from Heymanns Publishing House in Cologne,or they are
to be found in the Internet.
To Next Page
Loading...
Need help?
General
