WAGNER PC 15 - Wiring Diagram - Plast Coat 15

15
Wiring diagram Plast Coat 15
Slide ferrite bush 9952 405 in the control unit over the device connecting cable 0346 362 up to the threaded cable connector. Cut spiral hose 3110 905 (3x) to length of 125 mm. Slide spiral hose (1x) over device connecting cable 0348 362 between threaded cable connector and mounting base.
Slide spiral hose (1x) over stranded wires 0348 380 between mounting base. Slide spiral hose (1x) over wiring harness 0348 364 between mounting base. Fix the device connecting cable 0348 362, the stranded wires 0348 380 and the wiring harness 0348 364 to the mounting base using cable ties 9994 670. Attention: Fix device connecting cable to mounting base using separate cable tie.