Warning!
Mortar spraying machines develop high spraying pressures.
Caution – risk of injury!
Never reach into the spray jet with your fingers or hands!
Never aim the spray lance at yourself or other persons!
The materials sprayed cause chemical burns or irritations!
Protect your skin and eyes!
Each time before starting up, follow the procedure below as
specified in the Operating manual:
1. Only connect to the mains supply using a special distributing
point, e.g., using a fault current protective system with INF ≤30 mA.
2. Observe the admissible working pressures.
3. Check all connections for leaks.
The instructions for regular cleaning and servicing of the machine
must be strictly adhered to.
Before starting any work on the machine and during breaks, follow
the procedure below:
1. Note the setting time of the material.
2. Relieve the pressure in the spray lance and hose.
3. Switch the machine off.
Be safety-conscious!
햲
햳
햴
DANGER
1
To Next Page
Loading...
