WAGNER PI-F1 - Page 8

Start up
8 0241891 – PI-P1 / PI-F1 08/2008
The powder injector powder output quantity values in the following tables have been
determined under the following conditions:
Test structure: • EPG -D1 control unit
• PEA-C4-HiCoat spray gun with fan spray nozzle
• Powder container fluidized and shaken
Powder density: 1.6 kg/dm
3
Hint
The feed air quantity must be reduced for pulsing powder feed. However, the overall air
quantity must remain the same.
1. Powder injector Powder hose inner diameter10 mm
Total air quantity 3.5 Nm
3
/h
This setting is recommended for increased coating quality.
Powder hose length
6 m
Feed air
(Nm
3
/h)
Powder output quantity
(g/min)
2.0 100
2.5
180
3.5
300
2. Powder injector Powder hose inner diameter11 mm
Total air quantity 4.5 Nm
3
/h
This setting is recommended for standard coating quality.
Powder hose length
6 m
Powder hose length
12 m
Feed air
(Nm
3
/h)
Powder output quantity
(g/min)
Powder output quantity
(g/min)
2.0 110 60
3.0 250 190
4.5 410 330