WAGNER SF23 PRO - Table of Contents

36
Super Finish 23 Pro
GB
CONTENTS
Contents
1 SAFETY REGULATIONS FOR AIRLESS SPRAYING 37
1.1 Flash point _________________________________ 37
1.2 Explosion protection _________________________ 37
1.3 Danger of explosion and re from sources of
ignition during spraying work _________________ 37
1.4 Danger of injury from the spray jet _____________ 37
1.5 Secure spray gun against unintended operation __ 37
1.6 Recoil of spray gun __________________________ 37
1.7 Breathing equipment as protection against
solvent vapors ______________________________ 37
1.8 Prevention of occupational illnesses ____________ 37
1.9 Max. operating pressure ______________________ 38
1.10 High-pressure hose _________________________ 38
1.11 Electrostatic charging
(formation of sparks or ames) ________________ 38
1.12 Use of units on building sites and workshops _____ 38
1.13 Ventilation when spraying in rooms ____________ 38
1.14 Suction installations _________________________ 38
1.15 Earthing of the object ________________________ 38
1.16 Cleaning the unit with solvents ________________ 38
1.17 Cleaning the unit ___________________________ 38
1.18 Work or repairs at the electrical equipment ______ 38
1.19 Work at electrical components _________________ 38
1.20 Setup on an uneven surface ___________________ 38
2 GENERAL VIEW OF APPLICATION ____________ 39
2.1 Application ________________________________ 39
2.2 Coating material ____________________________ 39
2.2.1 Coating materials with sharp-edged additional
materials __________________________________ 39
2.2.2 Filtering ___________________________________ 40
3. DESCRIPTION OF UNIT _____________________ 40
3.1 Airless process ______________________________ 40
3.2 Functioning of the unit _______________________ 40
3.3 Explanatory diagram _________________________ 41
3.4 Adjusting the handle ________________________ 42
3.5 Technical data ______________________________ 42
4 STARTUP _________________________________ 43
4.1 Unit with suction system _____________________ 43
4.2 Unit with upper hopper ______________________ 43
4.3 High pressure hose and spray gun ______________ 43
4.4 Connection to the mains network ______________ 43
4.5 Cleaning preserving agent when starting-up of
operation initially ___________________________ 44
4.6 Ventilate unit (hydraulic system) if the sound of
inlet valve is not audible ______________________ 44
4.7 Taking the unit into operation with
coating material ____________________________ 44
5 SPRAYING TECHNOLOGY ___________________ 45
6 HANDLING THE HIGHPRESSURE HOSE _______ 46
7 INTERRUPTION OF WORK ___________________ 46
8 CLEANING THE UNIT _______________________ 47
8.1 Cleaning the unit from the outside _____________ 48
8.2 Suction lter _______________________________ 48
8.3 High-pressure lter __________________________ 48
8.4 Cleaning the Airless spray gun _________________ 49
9 SERVICING ________________________________ 49
9.1 General servicing ___________________________ 49
9.2 High-pressure hose __________________________ 49
10 REPAIRS AT THE UNIT ______________________ 50
10.1 Inlet valve _________________________________ 50
10.2 Outlet valve ________________________________ 51
10.3 Pressure control valve ________________________ 51
10.4 Replacing the power cable ___________________ 52
10.5 Typical wear parts ___________________________ 52
10.6 Connection diagram _________________________ 53
10.7 Remedy in case of faults ______________________ 54
11 SPARE PARTS AND ACCESSORIES ____________ 55
11.1 Super Finish 23 Pro accessories ________________ 55
11.2 Spare parts list Super Finish 23 Pro _____________ 60
11.3 Spare parts list high-pressure lter _____________ 62
11.4 Spare parts list hopper _______________________ 62
11.5 Spare parts List Trolley _______________________ 63
11.6 Spare parts list suction system ________________ 63
Testing of the unit ________________________________ 64
Important information on product liability_____________ 64
Note on disposal __________________________________ 64
Guarantee declaration _____________________________ 64
CE - declaration___________________________________ 65
European service network _________________________ 132