WAGNER W 570 FLEXIO

GB
25
W 570 Flexio
4. Description/ Scope of delivery
Description/ Scope of delivery (Fig. 1)
1) Air cap 2) Nozzle
3) Spray jet adjustment ring 4) Union nut
5) Wall Extra I-Spray spray attachment 6) Trigger
7) Air volume control 8) Spray gun rear part
9) Air lter cover (right + left) 10) Material volume adjustment
11) Mains lead 12) Container
13) Valve 14) Ventilating hose
15) Stirring rod 16) Feed hopper (2 pcs.)
17) Practice poster 18) Replacement air lter (2 pcs.)
19) Standard spray attachment 20) Replacement nozzle seal*
21) Lubricating grease*
* This is inside the container: remove it before starting operations!
5. Field of application
Many dierent coating substances can be processed with the W 570.
A dierent spray attachment must be used, depending on the coating substance:
Coating Materials Spray attachment
Low-viscosity coating substances:
Water- and solvent-based paints, nishes,
primers, 2-component paints, clear
nishes, automotive nishes, staining
sealers and wood sealer-preservatives.
All coating materials with the red Perfect
Spray logo
Standard
Interior wall paint (dispersions and latex
paint)
All coating materials with the green
Perfect Spray logo
Wall Extra I-Spray
6. Coating Materials Suitable for Use
Interior wall paint (dispersions and latex paint)
Water- and solvent-based paints, nishes, primers, 2-component paints, clear nishes,
automotive nishes, staining sealers and wood sealer-preservatives.