10
W 575 Flexio
AUS
1. Explanation of symbols used
This symbol indicates a potential danger for you or for the device.
Under this symbol you can nd important information on how to
avoid injuries and damage to the device.
Danger of electrical shock
Indicates tips for use and other particularly useful information.
Devices and accessories marked with this symbol are suitable for
processing low-viscosity materials such as paints, glazes and wall
paints specically designed for this purpose.
If a material bears this logo, it is particularly well suited for use with
the relevant device.
Devices and accessories marked with this symbol are suitable for
processing high-viscosity materials such as e.g. interior wall paints
(dispersions and latex paints).
If a material bears this logo, it is particularly well suited for use with
the relevant device.
2. General Safety Instructions
WARNING! Read all safety information, instructions, illustrations and technical data
provided with this power tool. Failure to observe the following instructions
may cause electric shock, re and/or severe injuries. Keep all safety information
and instructions for future reference. The term “power tool” used in this safety
information refers to mains-operated power tools (with power cable) and to
battery-powered power tools (without power cable).
1. Safety at the workplace
a) Keep your workplace clean and well lit. Disorder or unlit workplaces may result in
accidents.
b) Do not work with the power tool in potentially explosive environments
where there are ammable uids, gases or dust. Power tools generate sparks
that can ignite the dust or vapors.
c) Keep children and other persons away when using the power tool. If
distracted, you may lose control of the power tool.
To Next Page
Loading...
Need help?
General
