Technical Data
Max. viscosity: 110 DIN-s
Power source: 230 V ~
Power consumption: 300 W
Atomizing output: 75 W
Double insulation:
Sound pressure level: 81 dB (A)
Oscillation level: < 2.5 m/s²
Air hose length: 1.8 m
Weight: approx. 1.7 kg
Description (Fig. 1)
1 Air cup 10 Carrying belt
2 Nozzle 11 Air lter
3 Union nut 12 Mains lead
4 Gun body standard spray attachment 13 Spray gun holder
5 Trigger guard 14 Container
6 Material volume regulation 15 Ventilating hose
7 Handle 16 Valve
8 ON/OFF switch 17 Stir stick
9 Air hose
Coating Materials Suitable for Use
Water- and solvent-based paints, nishes, primers, 2-component paints, clear nishes,
automotive nishes, staining sealers and wood sealer-preservatives.
All coating materials with the red Perfect Spray logo.
Coating Materials Not Suitable for Use
Wall paints without the red Perfect Spray logo.
Alkali and acidic paints. Coating materials with a ash point below 21°C.
Preparation of the Coating Material
The enclosed spray attachment can be used to spray paints, varnishes and glazes that are
undiluted or slightly diluted. Detailed information is available in the technical data sheet
of the manufacturer ( Internet Download).
Stir the material up and put the required amount into the paint container.1.
Thinning recommendation
Sprayed material
Glazes undiluted
Wood preservatives, mordants, oils, disinfection agents,
plant protective agents undiluted
Paints containing solvents and water-soluble paints,
primers, vehicle coating paints, thick-lm glazes dilute by 5 - 10 %
To Next Page
Loading...
Need help?
General
