Need help?Do you have a question about the Wahoo KICKR and is the answer not in the manual?
General| Type | Smart Trainer |
|---|---|
| Resistance Type | Electromagnetic |
| Max Power Output | 2200 Watts |
| Max Simulated Grade | 20% |
| Max Decline | -10% |
| Accuracy | +/- 1% |
| Connectivity | Bluetooth, ANT+ |
| Total Weight | 21 kg |
| Rear Axle Compatibility | 130/135 mm QR, 12x142 Thru Axle |
| Weight Capacity | 113 kg |
| Flywheel Weight | 16 lb |
Remove the axle skewer from the Wahoo Kickr trainer.
Remove the axle nut with a 17mm spanner and set it aside.
Slide off the cassette and free-hub body from the trainer.
Take out the spacer located behind the free-hub and keep it.
Gently slide the adapter onto the trainer's spline, ensuring full engagement.
Position the free-hub spacer onto the axle in front of the adapter.
Screw the fixed gear cog and lock ring onto the adapter.
Mount bike, fit chain tug to dropout, and adjust chain tension.
Screw the 17mm axle nut back onto the axle without overtightening.
Re-insert the axle skewer and ensure it is firmly tightened.
To Next Page
