Wahoo KICKR - Fixed Gear Adapter Installation - Part 3; Attach Fixed Gear Cog and Lock Ring; Position Bike and Fit Chain Tug; Re-attach Axle Nut Loosely

www.velobike.co.nz
9. Screw the 17mm Axle
nut back onto the axle.
This does not need to be
done up tight.
8
7. Screw on a fixed gear
cog and lock ring.
8. Place the bike on the
trainer.
Fit the chain tug onto the
outside of the drive side
dropout.
Adjust the chin tension
using a 3mm Allen key
10. Re-insert the axle
skewer. Ensure this is
firmly tightened.