Need help?Do you have a question about the Waldorf FN8127E and is the answer not in the manual?
Critical warnings and cautions regarding installation, operation, and service safety.
Lists the specific Waldorf Electric Deep Fryer models covered by this manual.
Details voltage, power supply type, frequency, and current requirements for the appliance.
Physical measurements and diagrams for the FN(L)8127E series fryers.
Physical measurements and diagrams for the FN(L)8224E series fryers.
Physical measurements and diagrams for the FN(L)8127EE series fryers.
Physical measurements and diagrams for the FN(L)8224EE series fryers.
Details compliance with local codes, standards, and manufacturer specifications for correct installation.
Instructions for removing packaging, checking for damage, and verifying supplied parts.
Guidance on selecting an appropriate location with adequate clearance and ventilation.
Specifies required clearances to combustible and non-combustible surfaces for safe operation.
Notes that the model is delivered assembled, but ensures legs are securely attached.
Step-by-step instructions for attaching optional rear rollers to the appliance's legs.
Details safe and correct electrical connection procedures by qualified personnel.
Procedures for checking functions, thermostat calibration, and operator instruction before use.
Guidance on initial use, including pre-heating with oil to remove fumes and odors.
Provides a general overview and safety cautions for operating the appliance.
Identifies and explains the controls for manual models of the specified fryer series.
Identifies and explains the controls for digital models of the specified fryer series.
Explains the LED display, touch keys, and timer functions for the digital control models.
Details how to enter and set basic parameters like cook times and temperature.
Instructions for filling the fryer tank with oil or shortening to the correct levels.
Guidance on pre-heating shortening and initial oil heating procedures.
Step-by-step guide for turning on, setting temperature, and turning off manual control fryers.
Explains the safety cut-out system and how to reset it if triggered.
Visual guide illustrating the operation sequence for digital control fryers with melt cycle.
Instructions on how to select and use the timer functions for cooking.
Guidance on how to view actual and set temperatures on the digital display.
Steps to safely turn off the fryer and its power supply.
Detailed explanation of the over-temperature control, its setting, and reset procedure.
General warnings and cautions for safe and effective cleaning of the appliance.
Procedures for draining, filtering, and performing daily cleaning of the fryer.
Detailed instructions on how to safely open the drain valve for cleaning purposes.
Steps for performing a thorough weekly cleaning cycle using water and a commercial cleaner.
Instructions for cleaning and maintaining the exterior stainless steel surfaces.
Recommendations for scheduled maintenance checks by qualified service personnel.
A guide to common cooking problems and their potential causes and remedies.
Troubleshooting guide for electrical faults such as elements not heating or thermostat issues.
Electrical wiring diagram for the FN8127E 17kW single tank model.
Electrical wiring diagram for the FN8127E21 21kW single tank model.
Electrical wiring diagram for the FN8224E twin tank model.
Electrical wiring diagram for the FN8127EE 17kW single tank model.
Electrical wiring diagram for the FN8127EE21 21kW single tank model.
Electrical wiring diagram for the FN8224EE twin tank model.
Setting for straight or flexible cook time modes for digital controllers.
Allows adjustment for calibrating the temperature reading by +/- 14 degrees.
Options to display actual temperature or status indicators like 'HEAT' or 'drop'.
Configuration options for the melt cycle function (Liquid, Solid, Override).
Selection between Fahrenheit (°F) and Celsius (°C) for temperature display.
Overview of default programmable parameters and their settings for the appliance.
Lists general replacement parts for the fryer, including baskets, handles, and drain components.
Lists optional accessories available for the fryer, such as plinth kits.
To Next Page
General