Waldorf IN8200E INL8200E INB8200E INLB8200E IN8400E INL8400E INB8400E INLB8400E User Manual

33
• (2) The appliance switches off immediately.
Blink
Code
Problem Action
Normal Operation Normal Operation
1
Unsuitable induction cooking pan.
Internal wiring/coil connection malfunction. (2)
Check pan material.
Contact an authorized service agency.
2
Unsuitable induction cooking pan.
Coil overcurrent. (2)
Check pan material.
Contact an authorized service agency.
3
Air-cooling system obstructed.
Fan malfunction.
Heat sink overheated. (2)
Let appliance cool down.
Verify that air vents are not obstructed.
Check and clean air filter.
Contact an authorized service agency.
4
Overheated cook zone.
Overheated pan detected.
Sensor failure.
Let appliance and/or pan cool down. Check pan
material.
Verify that air vents are not obstructed.
Check and clean air filter.
Contact an authorized service agency.
5 Potentiometer defective. Contact an authorized service agency.
6
Ambient temperature too high (the cooling sys-
tem is not able to keep the induction appliance
in normal operating conditions).
Internal component overheated. (2)
Let appliance cool down.
Verify that air vents are not obstructed.
Check and clean air filter.
Verify that no hot air is taken in by the fan.
Reduce the ambient temperature.
The intake air temperature must be lower than
40°C [104°F].
Contact an authorized service agency.
7 Generator component failure. (2) Contact an authorized service agency.
8
Sensor error from heat sink.
Ambient temperature beyond normal operating
range. (2)
Verify that air vents are not obstructed.
Check and clean air filter.
Reduce ambient temperature.
Contact an authorized service agency.
10 Communication problem of the CAN interface Contact an authorized service agency.

Waldorf IN8200E INL8200E INB8200E INLB8200E IN8400E INL8400E INB8400E INLB8400E Specifications

General

Brand	Waldorf
Model	IN8200E INL8200E INB8200E INLB8200E IN8400E INL8400E INB8400E INLB8400E
Category	Cooktop
Language	English