Walimex Pro Excellence - Troubleshooting; Device Maintenance

27
8. Troubleshooting
Problem Possible cause Remedy
The radio
remote
trigger
has no
function
Cables not tightly
plugged in
Plug all cables in tightly
Studioashswitchedoff Switchonthestudioash
Different channels/
groups set between
transmitter and receiver
Make the same
channel-group settings
on both devices, see
channel adjustment
Battery on transmitter
too weak
Replace the battery, see
battery replacement
9. Maintaining the device
9.1. Continuous inspection and maintenance of the device
What you should do Before each use
Inspect all cables and plugs for damage X
WARNING
If damaged:
Dangerofelectricshockanddangerofreduetoshortcircuit.
Have the device repaired by an electrician immediately.