Walker A21 Hi-Dump - Safety, Control, and Instruction Decals

To Next Page

To Previous Page

SAFETY, CONTROL, AND INSTRUCTION DECALS

Safety, Control, and Instruction Decals are installed on the machine;

if any are missing, illegible, or damaged, a replacement should be ordered and installed before

putting the machine into operation. The Decal Part Number is listed below and in the Parts Manual.

Operation Decal: Hi-Dump

Operation

Location: Switch Cover

Part Number: 8400-9

Safety Decal: Auxiliary Power Terminals

Location: Auxiliary Power Terminal Plate

Part Number: 8400-7

EQUIPPED

WITH

8400-16

HI-DUMP

Decal: Decal, Hi-Dump

Location: Rear Bumper

Part Number: 8400-16

8600-5

Safety Decal: Decal, Engine Exhaust

Location: LH Side of Chassis

Part Number: 8600-5

Safety Decal: Safety Lockout Arm

Location: Lower Lift Arm

Part Number: 8401-9