Walker MC (16 HP - SD Model Body Assembly

8
ITEM PART DESCRIP TION NO.
NO. NO. REQ’D
ITEM PART DESCRIP TION NO.
NO. NO. REQ’D
Use only genuine Walker
®
replacement parts. Effective Date 12-01-00
BODY ASSEMBLY (SD MODELS)
Utility Bed Assembly
1 8650-10 Bed Liner 1
2 5656 Utility Bed 1
(Includes Items # 1 & 3)
3 5845 Rubber Bumper (1.50 OD x 1.25) 2
4 5652-1 Utility Bed Mount, LH 1
5 5651-1 Utility Bed Mount, RH 1
Rear Bumper Assembly (SD Models Only)
*
6 7153-3 Cover Plate 1
7 5112 Rear Bumper 1
8 5161 Bumper Pad 2
9 5162 Roller Wheel (5") 2
Fasteners
F002 10-24 Keps Nut 4
F005 1/4-20 ESNA Nut 2
F009 5/16-18 Whiz Locknut 10
F014 3/8-16 ESNA Nut 2
F020 5/16-18 ESNA Nut 2
F033 1/4-20 x 1 PTH Bolt 2
F034 5/16-18 x 3/4 Hex Bolt 8
F042 3/8-16 x 2-1/4 Hex Bolt 2
F050 1/4 SAE Washer 2
F059 3/8 Wave Spring Washer 2
F084 5/16 Wave Spring Washer 2
F091 5/16-18 x 5/8 Hex Bolt 2
F128 10-24 x 3/8 PTHMS 4
*
Rear Bumper Assembly for GHS Models is not shown here.
Refer to BODY / CHASSIS ASSEMBLY (GHS MODELS),
Page 4, or BODY ASSEMBLY (GHS 9.5 BUSHEL MOD-
ELS), Page 6.
NOTE: Refer to BODY / CHASSIS ASSEMBLY (GHS MODELS),
Page 4 for all common parts used on both GHS and SD
models.