46
ITEM PART DESCRIP TION NO.
NO. NO. REQ’D
ITEM PART DESCRIP TION NO.
NO. NO. REQ’D
Use only genuine Walker
®
replacement parts. Effective Date 12-01-00
SUSPENSION SEAT KIT
Kit 6103-25 Suspension Seat Option / Kit
Includes Items # 1-3, 5-7, 11, 14, fasteners listed (except as indi-
cated; refer to NOTE) and instructions. May be ordered as a fac-
tory-installed option or as a kit for dealer installation. Contact your
Walker dealer.
1 6103-11 Suspension Seat 1
2 5941-5 Safety Switch (Normal Open)
*
3 6103-33 Seat Mount Plate, LH 1
4 7223 Compression Spring 2
5 5975-3 Cable Tie (50# x 7") 2
6 5975-1 Cable Tie (18# x 3-3/4") 1
7 6103-23 Wire Harness, S/C/T Suspension Seat 1
8 7846 Rubber Washer 3/8 x 1-1/4 x 1/8 2
9 7204 Shoulder Bolt, Seat Mount 2
10 5977-6 Grommet (1 x 1-1/4) 2
11 5841 Retainer Washer 2
12 7845 Rubber Bumper (1.375 x 0.63) 2
13 7440-5 Shock Mount (1.25 x 0.75) 2
14 6103-34 Seat Mount Plate, RH 1
Fasteners
F002 10-24 Keps Nut 4
F009 5/16-18 Whiz Locknut 6
F026 10-24 x 1/2 PPHMS 4
F168 5/16 Split Lock Washer 4
F227 3/8 x 1-1/4 x 1/8 Washer (Plastic) 2
F357 M8 x 16 Hex Bolt 2
F358 M8 x 25 Hex Bolt 2
*
Only one Safety Switch is included with kit. One is reused
from Electrical Assembly. Refer to ELECTRICAL ASSEM-
BLIES (BODY COMPONENTS), Page 34.
NOTE: Reuse Items # 4, 8-10, 12, two (2) each of Items # F002,
F009 and F026, and Item # F227 from Seat Assembly.
Refer to BODY / CHASSIS ASSEMBLY (GHS MODELS),
Page 4.
To Next Page
Loading...
