Walker MC - Lubrication; Lubrication Points - Perfaerator

Page: 2-34
WALKER MANUFACTURING COMPANY
July 2006
SERVICE INSTRUCTIONS
Ident Lubrication No.
No. Location Type Places
Ident Lubrication No.
No. Location Type Places
Lubrication Points - Perfaerator
1 Deck Caster Wheel Fork Pivot Grease 2
2 Deck Caster Wheel Bearing Grease 2
3 Rod Bearing Bushing Grease 4
4 Drive Chain Oil
* 1
5 Eccentric Assembly Tine Grease
** 12
6 Actuator Rod Pivots Grease 4
7 Deck Support Arm Socket Grease 2
8 Universal Joint Shaft Assembly Grease
* 1
9 Actuator Link Latch Oil 1
10 Foot Trigger Pivot Oil 1
11 Engage Lever Pivot Grease 1
* Grease every eight (8) hours.
** Grease every eight (8) hours using Almagard #3752 lubricant
(Walker P/N 6685-7).
NOTE: The gearbox is permanently lubricated (oil filled) and
sealed requiring no scheduled lubrication. However, the
gearbox oil seal(s) should be checked every 25 hours for
indication of an oil leak.