English - 12 -
Connecting to a Wired Network (optional)
For connecting to a wired LAN network, you should perform the following steps:
Connect broadband ISP connection ethernet cable to the ETHERNET INPUT of your modem.•
Afterwards, you should connect your PC to the one of your modem’s LAN connectors (e.g. LAN 1) by using •
a proper LAN cable.
Use another LAN output of your modem (e.g. LAN 2) to enable the connection to your TV. You can add •
your TV to your LAN by connecting the LAN port at the rear of your TV to your modem’s LAN connector as
illustrated below.
To access and play shared les, you must Select Media Browser. Press Menu button and select Media •
Browser by using Left or Right button. Press OK to continue. Select the desired le type and press OK. You
must always use the Media Browser screen to access and play shared network les.
To congure wired settings please refer Network Settings section in Settings menu.
You might be able to connect your TV to your LAN network depending on your network’s conguration. In •
such a case, use an ethernet cable to connect your TV directly to the network wall outlet.
To Next Page
Loading...
Need help?
General
