Wallbox Commander 2 - Page 13

DE
Non-Power Sharing
1. Power o and carefully open all the connected chargers.
2. Perform the steps listed in the section “Installation of charging network” of this manual.
Follow the instructions for opening the charger in the charger’s installation guide
Existing Installation
PT
Non-Power Sharing
1. Power o and carefully open all the connected chargers.
2. Perform the steps listed in the section “Installation of charging network” of this manual.
Follow the instructions for opening the charger in the charger’s installation guide
Existing Installation
NL
Non-Power Sharing
1. Power o and carefully open all the connected chargers.
2. Perform the steps listed in the section “Installation of charging network” of this manual.
Follow the instructions for opening the charger in the charger’s installation guide
Existing Installation
SV
Non-Power Sharing
1. Power o and carefully open all the connected chargers.
2. Perform the steps listed in the section “Installation of charging network” of this manual.
Follow the instructions for opening the charger in the charger’s installation guide
Existing Installation
FR
Non-Power Sharing
1. Power o and carefully open all the connected chargers.
2. Perform the steps listed in the section “Installation of charging network” of this manual.
Follow the instructions for opening the charger in the charger’s installation guide
Existing Installation
CA
Non-Power Sharing
1. Power o and carefully open all the connected chargers.
2. Perform the steps listed in the section “Installation of charging network” of this manual.
Follow the instructions for opening the charger in the charger’s installation guide
Existing Installation
IT
Non-Power Sharing
1. Power o and carefully open all the connected chargers.
2. Perform the steps listed in the section “Installation of charging network” of this manual.
Follow the instructions for opening the charger in the charger’s installation guide
Existing Installation
ES
Non-Power Sharing
1. Power o and carefully open all the connected chargers.
2. Perform the steps listed in the section “Installation of charging network” of this manual.
Follow the instructions for opening the charger in the charger’s installation guide
Existing Installation
NO
Non-Power Sharing
1. Power o and carefully open all the connected chargers.
2. Perform the steps listed in the section “Installation of charging network” of this manual.
Follow the instructions for opening the charger in the charger’s installation guide
Existing Installation