Wallbox Commander 2 - Page 15

DE
Power Sharing
1. Power o and carefully open all the connected chargers.
Follow the instructions for opening the charger in the charger’s installation guide
2. Perform the steps listed in the section “Installation of charging network” of this manual.
3. For more details, refer to the Power Sharing Smart Manual.
Existing Installation
PT
Power Sharing
1. Power o and carefully open all the connected chargers.
Follow the instructions for opening the charger in the charger’s installation guide
2. Perform the steps listed in the section “Installation of charging network” of this manual.
3. For more details, refer to the Power Sharing Smart Manual.
Existing Installation
NL
Power Sharing
1. Power o and carefully open all the connected chargers.
Follow the instructions for opening the charger in the charger’s installation guide
2. Perform the steps listed in the section “Installation of charging network” of this manual.
3. For more details, refer to the Power Sharing Smart Manual.
Existing Installation
SV
Power Sharing
1. Power o and carefully open all the connected chargers.
Follow the instructions for opening the charger in the charger’s installation guide
2. Perform the steps listed in the section “Installation of charging network” of this manual.
3. For more details, refer to the Power Sharing Smart Manual.
Existing Installation
FR
Power Sharing
1. Power o and carefully open all the connected chargers.
Follow the instructions for opening the charger in the charger’s installation guide
2. Perform the steps listed in the section “Installation of charging network” of this manual.
3. For more details, refer to the Power Sharing Smart Manual.
Existing Installation
CA
Power Sharing
1. Power o and carefully open all the connected chargers.
Follow the instructions for opening the charger in the charger’s installation guide
2. Perform the steps listed in the section “Installation of charging network” of this manual.
3. For more details, refer to the Power Sharing Smart Manual.
Existing Installation
IT
Power Sharing
1. Power o and carefully open all the connected chargers.
Follow the instructions for opening the charger in the charger’s installation guide
2. Perform the steps listed in the section “Installation of charging network” of this manual.
3. For more details, refer to the Power Sharing Smart Manual.
Existing Installation
ES
Power Sharing
1. Power o and carefully open all the connected chargers.
Follow the instructions for opening the charger in the charger’s installation guide
2. Perform the steps listed in the section “Installation of charging network” of this manual.
3. For more details, refer to the Power Sharing Smart Manual.
Existing Installation
NO
Power Sharing
1. Power o and carefully open all the connected chargers.
Follow the instructions for opening the charger in the charger’s installation guide
2. Perform the steps listed in the section “Installation of charging network” of this manual.
3. For more details, refer to the Power Sharing Smart Manual.
Existing Installation