Wallbox Commander 2 - Page 49

DE
1. Each Dynamic power sharing network consists of one primary charger and up to 24 secondary
chargers.
2. Configure the rotary switch for each charger to configure its role.
3. Any other: Stand alone.
Check the chargers Installation guide
Konfiguration
PT
1. Each Dynamic power sharing network consists of one primary charger and up to 24 secondary
chargers.
2. Configure the rotary switch for each charger to configure its role.
3. Any other: Stand alone.
Check the chargers Installation guide
Configuratie
NL
1. Each Dynamic power sharing network consists of one primary charger and up to 24 secondary
chargers.
2. Configure the rotary switch for each charger to configure its role.
3. Any other: Stand alone.
Check the chargers Installation guide
Configuratie
SV
1. Each Dynamic power sharing network consists of one primary charger and up to 24 secondary
chargers.
2. Configure the rotary switch for each charger to configure its role.
3. Any other: Stand alone.
Check the chargers Installation guide
Konfiguration
FR
1. Each Dynamic power sharing network consists of one primary charger and up to 24 secondary
chargers.
2. Configure the rotary switch for each charger to configure its role.
3. Any other: Stand alone.
Check the chargers Installation guide
Configuration
CA
1. Each Dynamic power sharing network consists of one primary charger and up to 24 secondary
chargers.
2. Configure the rotary switch for each charger to configure its role.
3. Any other: Stand alone.
Check the chargers Installation guide
Configuració
IT
1. Each Dynamic power sharing network consists of one primary charger and up to 24 secondary
chargers.
2. Configure the rotary switch for each charger to configure its role.
3. Any other: Stand alone.
Check the chargers Installation guide
Configurazione
ES
1. Each Dynamic power sharing network consists of one primary charger and up to 24 secondary
chargers.
2. Configure the rotary switch for each charger to configure its role.
3. Any other: Stand alone.
Check the chargers Installation guide
Configuración
NO
1. Each Dynamic power sharing network consists of one primary charger and up to 24 secondary
chargers.
2. Configure the rotary switch for each charger to configure its role.
3. Any other: Stand alone.
Check the chargers Installation guide
Konfigurasjon