Need help?Do you have a question about the Walrus Audio Mako Series and is the answer not in the manual?
General| Input Impedance | 1 MΩ |
|---|---|
| Output Impedance | 100 Ω |
| Effects | Delay, Reverb, Modulation |
| Power | 9V DC, center negative |
| Bypass | True Bypass |
| Inputs | Mono (TS) |
| Outputs | Mono (TS) or Stereo (TRS, depending on the specific model) |
| MIDI | Yes |
| Series | Mako |
| Current Draw | 300mA |
Controls for shaping the low, mid, and high frequency tone stack of the selected amp model.
Controls the overall output level and the amount of gain/character through the amp circuit.
Engages a tight room reverb to add a sense of space to your sound.
Selects one of six on-board cabinet impulse responses (IRs) for the selected amp model.
Selects between three classic amp models: Fullerton, London, and Dartford.
Turns the pedal on/off and indicates the pedal's status.
Engages a volume/gain boost and indicates preset modification status.
Details multiple input/output configurations including Mono and Stereo options.
Provides an on-board headphone output for practicing.
Used to load IR files and update pedal firmware via computer.
Instructions for recalling and saving presets on the ACS1.
Procedure to assign the MIDI channel for controlling the pedal.
Explains MIDI In/Thru ports and recalling presets via MIDI Program Change messages.
Lists MIDI CC numbers for controlling parameters like Bass, Mid, Gain, and more.
Steps to restore the pedal to its original factory settings.
Guide to updating firmware and uploading custom cabinet IRs via the web interface.
Information on where to find new features and updates for the ACS1.
To Next Page
