Note: When mounting classic pads, ensure the Ω sign
is facing up on step 2.
12
7
Large wand accessories
D) Mounting a cleaning pad
1. Squeeze and insert clamp ring.
3. Firmly press in tungsten tip.
2. Insert cleaning pad.
4. Remove tip with installed pad and clamp ring.
B) PTFE clamp rings
PTFE clamp rings are designed to hold the cleaning pads
on the tungsten inserts.
They are available in two sizes:
C) SURFOX electrolyte solutions
Surfox electrolyte solutions are specially formulated phos-
phoric acid cleaning solutions designed to be used only in
Walter SURFOX systems.
Clamp ring for standard cleaning pads
No: 54-B 002
Use with standard inserts. 10 per package.
Narrow clamp ring for narrow pads
No: 54-B 020
Use with narrow inserts. 10 per package.
Cleans up to 3-5 feet per minute.
Cleans up to 3-5 feet per minute.
SURFOX-G
Electrolyte Cleaning Solution
SURFOX-T
Heavy-Duty
Electrolyte Cleaning Solution
1.5 L/50.7 oz. No: 54-A 065
STD Pack: 1 STD Carton: 4
5 L/1.3 gal. No: 54-A 066
1 STD Pack: 1 STD Carton: 1
20 L/5.2 gal. No: 54-A 067
STD Pack: 1 STD Carton: 1
208 L/55 gal. No: 54-A 068
STD Pack: 1 STD Carton: 1
1.5 L/50.7 oz. No: 54-A 005
STD Pack: 1 STD Carton: 4
5 L/1.3 gal No: 54-A 006
1 STD Pack: 1 STD Carton: 1
20 L/5.2 gal. No: 54-A 007
STD Pack: 1 STD Carton: 1
208 L/55 gal. No: 54-A 008
STD Pack: 1 STD Carton: 1
To Next Page
