SILOTOP R03
3.0 TECHNICAL INFORMATION
2
FIL.100.--.M.EN Issue: A2
06.12
14
3.10 Safety devices
Access to the inspection hatches is not necessary while using the equipment concerned. Their use represents
extraordinary use as they were provided for removing foreign bodies and accumulated material from the equip-
ment or for extraordinary maintenance operations.
The equipment is shipped with the inspection hatch(es) closed with a bolted device which needs to be un-
ORFNHGE\PHDQVRIDVSDQQHUZUHQFKDVHQYLVDJHGE\WKH6WDQGDUGVFRQFHUQLQJ¿[HGSURWHFWLRQV
5HVLGXDOULVNV
Depending on the use of the dust collector, the installer must use special signs to inform operators of the fol-
lowing residual risks:
1. Mechanical hazards. For maintenance activities, the operator must always use personal protection de-
vices. Special warning plates in the individual sections of the equipment indicate the compulsory personal
protection devices to be used:
USE OF
GLOVES IS
COMPULSORY
USE OF
SAFETY FOOTWEAR
IS
COMPULSORY
USE OF
GLOVES IS
COMPULSORY
WARNING
DANGEROUS
TEMPERATURE
2. Presence of possible residual high temperatures after the dust collector is stopped. During mainte-
nance and cleaning operations and in certain work sections, with the equipment stopped, the operator may
touch parts of the dust collector having very hot surfaces. Warning notices positioned at strategic points in-
dicate the danger due to the presence of very hot surfaces and the liability of the operator in using personal
protection devices, specially protective gloves.
USE OF
MASK
IS COMPULSORY
3. Presence of potentially hazardous dusts. In case of routine and extraordinary maintenance opera-
tions, the operator must use suitable personal protection devices, specially protective face masks
that belong to a Class suitable for the type of dust collector as well as gloves or clothing. For further
details, refer to the safety chart of the material handled.
To Next Page
Loading...
Need help?
General