Need help?Do you have a question about the Wampler METAVERSE and is the answer not in the manual?
General| Bypass | True Bypass |
|---|---|
| Power Supply | 9V DC (center negative) |
| Current Draw | 300mA |
| Input Impedance | 1 MΩ |
| Effects | Delay |
| Controls | Mix |
| Presets | 8 user presets |
| Output Impedance | 1 kΩ |
Selects between the 11 different delay Programs on the pedal.
Allows selection between True Bypass and Buffered (Trails) mode.
Details the 9V DC power supply and current draw.
Notes the 1/4" input for an expression pedal.
Turns the delay effect on/off; LED indicates status.
Used for incrementing presets and indicating status.
Function for setting tempo or incrementing presets.
Details the main Delay, Mod, Feedback, Mix, and Tone controls.
Selects between the 11 delay Programs.
Sets the delay time from 25ms to 2000ms.
Determines the number of delay repeats.
Adjusts the frequency profile of the delay effect.
Controls modulation depth and rate.
Blends dry and wet signal levels and sets output level.
Selects between True Bypass and Buffered Bypass (Trails).
Connect a 9V DC Center Negative power supply (130mA).
Steps to reset all pedal settings to default values.
Details the five-year warranty for material and workmanship defects.
Instructions for returning defective products for service.
Limits Wampler's liability for indirect or consequential damages.
To Next Page
