WanderGuard 18029 - Door Coverage Testing Methods

To Previous Page

For assistance, please call Stanley-Senior Technologies at

800-824-2996 or 402-475-4002

Mailing address: Stanley-Senior Technologies • P. O. Box 80238

Lincoln, NE 68501-0238

Shipping address: Stanley-Senior Technologies• 1620 N. 20th Circle

Lincoln, NE 68503-1103

To test a WanderGuard

door coverage:

1. While holding the tester in a vertical position (screen facing you),

place the tester in one of the positions illustrated below - you may

have to kneel to keep the tester in the vertical position.

2. Press the DOOR button.

3. The antenna should chirp and “Door Test” will be displayed on the

System Status Display (if installed).

If the alarm does not sound, make sure the door is open and the tester is

within X inches of the monitor. To verify your universal tester is

working properly, try testing another door. If the alarm still does

not sound at several different doors, contact Senior Technologies’

Technical Service at 800-824-2996.

Single Door Coverage Test

Double Door Coverage Test

Antenna

Test Point