5
• If the bracelet is still operational, the LED will flash green four times
and the ID number of the bracelet will be displayed.
• If the bracelet has reached the End-of-Service phase, the LED will be a
steady red.
• If the bracelet is not detected, the LED will be a steady red and display
“- - -”.
If the Universal Tester does not detect the bracelet:
• Move the tester closer to the bracelet.
• Hold the tester at a different orientation in relation to the bracelet.
• ‘Sweep’ the tester by the bracelet.
NOTE: Test one bracelet at a time. Surrounding bracelets should be at
least 5 feet away.
LED blinks
GREEN 4 times
LED is steady
RED
LED is steady
RED
To Next Page
Loading...