15
SAFETY FEATURES
The Waring
®
Commercial Convection Oven is equipped with the
following feature to ensure safety:
Thermostat Overload Protection
If the unit heats up beyond the recommended temperature level, the
oven will automatically turn off. To reset, unplug the unit from the
wall outlet and allow it to cool down. Once the unit has returned to a
safe operating temperature, you can now reset the oven by locating
the reset button on the right side of the rear panel (see illustration).
Using a toothpick or another long, thin object, push the reset button
in. Plug the unit back in, turn on and continue use. If the unit still
does not operate, repeat steps above or call a Waring Certied
Customer Service Center for assistance.
To Next Page
Loading...
