What does error E 01 mean on my Warmhaus LAWA 18?
If your Warmhaus Boiler displays error code E 01, it indicates that the flue sensor is faulty. First, try resetting and restarting the boiler. If the problem persists, contact an authorized service for assistance.
What to do if the Warmhaus LAWA 18 shows error E 17?
If your Warmhaus Boiler displays error code E 17, it indicates that the FLOW and LIMIT Sensor (double NTC) is faulty. First, try resetting and restarting the boiler. If the problem persists, contact an authorized service for assistance.
What causes error E 11 on a Warmhaus LAWA 18?
If your Warmhaus Boiler displays error E 11, it indicates a gas valve harness issue. The suggested solution is to contact an authorized service. Also, check the gas valve cabling between the board and the gas valve.
What to do if the Warmhaus LAWA 18 shows error E 05?
If your Warmhaus Boiler displays error code E 05, it indicates a faulty central heating FLOW temperature sensor. The suggested solution is to contact an authorized service.
What does error E 08 mean on my Warmhaus LAWA 18 Boiler?
If your Warmhaus Boiler displays error code E 08, it indicates a water blockage on the syphon or an issue with the electronic board. The suggested solution is to contact an authorized service.
Crucial safety warnings regarding installation and product use to prevent hazards.
Essential rules and regulations for the safe and correct installation of combi boilers.
Procedures and warnings for connecting natural gas and LPG supplies to the combi.
Instructions for safe electrical connections and power supply requirements.
Guide on selecting operating modes (ON/OFF, Summer, Winter) and basic operations.
A list of error codes, their causes, and suggested solutions for troubleshooting.
To Next Page
General
