What does error E 01 mean on my Warmhaus LAWA 32?
If your Warmhaus Boiler displays error code E 01, it indicates that the flue sensor is faulty. First, try resetting and restarting the boiler. If the problem persists, contact an authorized service for assistance.
What to do if the Warmhaus LAWA 32 Boiler shows error E 17?
If your Warmhaus Boiler displays error code E 17, it indicates that the FLOW and LIMIT Sensor (double NTC) is faulty. First, try resetting and restarting the boiler. If the problem persists, contact an authorized service for assistance.
What causes error E 11 on a Warmhaus LAWA 32?
If your Warmhaus Boiler displays error E 11, it indicates a gas valve harness issue. The suggested solution is to contact an authorized service. Also, check the gas valve cabling between the board and the gas valve.
What to do if the Warmhaus Boiler shows error E 05?
If your Warmhaus Boiler displays error code E 05, it indicates a faulty central heating FLOW temperature sensor. The suggested solution is to contact an authorized service.
What does error E 08 mean on my Warmhaus LAWA 32 Boiler?
If your Warmhaus Boiler displays error code E 08, it indicates a water blockage on the syphon or an issue with the electronic board. The suggested solution is to contact an authorized service.
Specifies general rules for selecting suitable locations for installing combi boilers.
Lists specific locations and areas where hermetic combi boilers should not be installed.
Provides instructions for securely mounting the combi boiler on a wall and choosing the optimal installation spot.
Explains the procedures for connecting the combi boiler to natural gas or LPG supply.
Details the necessary pre-checks and controls before the initial startup of the combi boiler.
Offers fundamental guidance on the safe and correct usage of the combi boiler.
Guides users on how to reset the combi boiler in case of errors or malfunctions.
A comprehensive table listing error codes, malfunctions, probable causes, and solutions.
To Next Page
General
