Compliance
Operator’s Manual 29
Manufacturer’s Declaration
WARNING
The use of accessories and cables other than those specified may result in
increased emission and/or decreased immunity of the warming system.
The warming system is suitable for use in the specified electromagnetic
environment. The customer and/or user of the warming system should ensure it
is used in the prescribed electromagnetic environment.
Electromagnetic Compatibility (EMC)
Electromagnetic Emissions
Table6.Electromagnetic Emissions Guidelines
Emissions Test Compliance Electromagnetic Environment Guidance
RF emission
CISPR 11
Group 1,
Class A
This is a class A product per IEC CISPR 11 and is not
intended to be used in a residential environment. If
used in a domestic environment, this equipment
may not offer adequate protection to radio-
frequency communication services. The user may be
required to take mitigation measures, such as
relocating or re-orienting the equipment.
Harmonic emissions
IEC/EN 61000-3-2
N/A The warming system is suitable for use in all
establishments other than domestic and those
directly connected to the public low-voltage power
supply network that supplies buildings used for
domestic purposes.
Voltage fluctuation/
flicker emissions
IEC/EN 61000-3-3
N/A
To Next Page
Loading...