Warn 92332 - MAINTENANCE; CARE

©2013 Warn Industries, Inc.WARN® and the WARN logo are trademarks of Warn Industries Inc. 6 92334A0
CARELESS INSTALLATION AND OPERATION CAN RESULT IN SERIOUS INJURY OR EQUIPMENT DAMAGE. READ AND UNDERSTAND ALL
SAFETY PRECAUTIONS AND OPERATING INSTRUCTIONS BEFORE INSTALLING AND OPERATING THIS PRODUCT.
MAINTENANCE / CARE
1. Inspect all parts on the winch, winch mount, and related hardware prior to each use. Replace all hardware that appears rusted or
deformed.
2. Inspect all nuts and bolts on the winch, winch mount,, and related hardware prior to each use. Tighten all nuts that appear to be
loose. Stripped, fractured, or bent bolts or nuts need to be replaced.
3. Check all cables prior to use. Replace cables that look worn or frayed.
4. Check all moving or rotating parts. Remove debris that may inhibit the part from moving freely.
6. Install winch to winch mounting bracket using hardware
found in winch kit. Feed rope thorugh back of fairlead and
out front of fairlead.
Torque hardware to specications listed in winch mount
instructions.
7. Re-install grille plate.
8. Install hook (found in winch kit) to winch rope.
Winch
Winch mounting plate