Warn 79673 User Manual

WARN® INDUSTRIES PAGE 1 79671A2
©2011 Warn Industries, Inc.
WARN® and the WARN logo are trademarks of Warn Industries Inc.
Your safety, and the safety of others, is very important. To help you make informed decisions about safety, we
have provided installation and operating instructions and other information on labels and in this guide. This
information alerts you to potential hazards that could hurt you or others. It is not possible to warn you about all
potential hazards associated with this product, you must use your own good judgment.
CARELESS INSTALLATION AND OPERATION CAN RESULT IN SERIOUS INJURY OR EQUIPMENT
DAMAGE. READ AND UNDERSTAND ALL SAFETY PRECAUTIONS AND OPERATING INSTRUCTIONS
BEFORE INSTALLING AND OPERATING THIS PRODUCT.
This guide identifies potential hazards and has important safety messages that help you and others avoid personal
injury or death. WARNING and CAUTION are signal words that identify the level of hazard. These signal words
mean:
WARNING signals a hazard that could cause serious injury or death, if you do not follow
recommendations.
CAUTION signals a hazard that may cause minor to moderate injury, if you do not
follow recommendations.
This guide uses NOTICE to call attention to important mechanical information, and Note: to emphasize genera
l
information worthy of special attention.
INSTALLATION INSTRUCTIONS
ATV Front Plow Mount Kit
Part Number: 79673
Applications: 2006-2009 Honda Rincon 680
2003-2005 Honda Rincon 650
WARNING

AlwAlw
AlwAlw
Alw
aa
aa
a
ys ys
ys ys
ys Read the Plow Operator’s Manual, the Winch Operator’s Manual and all warning labels before operating.

AlwAlw
AlwAlw
Alw
aa
aa
a
ys ys
ys ys
ys use extreme caution when drilling on any vehicle. Make sure that all fuel lines, brake lines, electrical wires, and other
objects are not punctured or damaged when/if drilling on the vehicle. Thoroughly inspect the area to be drilled (on both sides
of material) prior to drilling, and relocate any objects that may be damaged. Failure to inspect the area to be drilled may
result in vehicle damage, electrical shock, fire or personal injury.

AlwAlw
AlwAlw
Alw
aa
aa
a
ys ys
ys ys
ys wear safety glasses when installing this kit. A drilling operation will cause flying metal chips. Flying chips can cause
eye injury.

AlwAlw
AlwAlw
Alw
aa
aa
a
ys ys
ys ys
ys use extreme caution when cutting and trimming during fitting.

AlwAlw
AlwAlw
Alw
aa
aa
a
ys ys
ys ys
ys remove jewelry and wear eye protection.

NeNe
NeNe
Ne
vv
vv
v
er er
er er
er lean over battery while making connections.

NeNe
NeNe
Ne
vv
vv
v
er rer r
er rer r
er r
outout
outout
out
e electrical cables:e electrical cables:
e electrical cables:e electrical cables:
e electrical cables:
o Across any sharp edges.
o Through or near moving parts.
o Near parts that become hot.

AlwAlw
AlwAlw
Alw
aa
aa
a
ysys
ysys
ys insulate and protect all exposed wiring and electrical terminals.

AlwAlw
AlwAlw
Alw
aa
aa
a
ysys
ysys
ys install terminal boots as directed in installation instructions.

AlwAlw
AlwAlw
Alw
aa
aa
a
ys ys
ys ys
ys use appropriate and adequate care in lifting components into place.

AlwAlw
AlwAlw
Alw
aa
aa
a
ys ys
ys ys
ys insure components will remain secure during installation and operation.

AlwAlw
AlwAlw
Alw
aa
aa
a
ys ys
ys ys
ys tighten all nuts and bolts securely, per the installation instructions.

AlwAlw
AlwAlw
Alw
aa
aa
a
ysys
ysys
ys operate the vehicle at a walking speed with the blade installed. Never exceed 5 mph (8 km/h), even with blade up.

AlwAlw
AlwAlw
Alw
aa
aa
a
ys ys
ys ys
ys plow cautiously, impact with hidden or stationary object may cause the vehicle to stop suddenly or go out of control.

NeNe
NeNe
Ne
vv
vv
v
er er
er er
er operate the vehicle on slopes greater than 10 degrees with the plow installed.

NeNe
NeNe
Ne
vv
vv
v
er er
er er
er stand or ride on the plow.

AlwAlw
AlwAlw
Alw
aa
aa
a
ys ys
ys ys
ys stay clear of moving parts and joints. Always keep others away when operating or adjusting plow.

AlwAlw
AlwAlw
Alw
aa
aa
a
ys ys
ys ys
ys perform regular inspections and maintenance on the plow mechanism, fasteners, cable and related hardware.

AlwAlw
AlwAlw
Alw
aa
aa
a
ys ys
ys ys
ys replace all worn or damaged parts before operating.

NeNe
NeNe
Ne
vv
vv
v
er er
er er
er operate this WARN product with damaged or missing parts.

AlwAlw
AlwAlw
Alw
aa
aa
a
ys ys
ys ys
ys drive slowly over bumpy and rough terrain. Driving at speeds that cause the plow to bounce while in the up position
can cause the winch to back-drive, causing the plow to work its way down. This may result in the plow impacting a stationary
object and cause damage to the vehicle and operator injury or death.

AlwAlw
AlwAlw
Alw
aa
aa
a
ys ys
ys ys
ys drive at speeds such that the plow does not bounce and be aware of the plow position while driving at all times.

AlwAlw
AlwAlw
Alw
aa
aa
a
ys ys
ys ys
ys be aware that the purpose of the j-bolt is to break the connection between the plow and the winch, to prevent serious
damage to the ATV if the plow is raised too high. The plow blade will drop suddenly if the j-bolt breaks, so always be sure
there are no bystanders when you raise and lower the plow.

NeNe
NeNe
Ne
vv
vv
v
er er
er er
er raise the top of the plow above the headlights of the ATV, as it may damage the vehicle and plow.

AlwAlw
AlwAlw
Alw
aa
aa
a
ys ys
ys ys
ys replace a deformed or broken j-bolt with the spare j-bolt included in the kit.
INJURY HAZARD
Failure to observe these instructions could lead to severe injury or death.
*Not compatible with 2.5ci and A2000 winches.

Warn 79673 Specifications

General

Brand	Warn
Model	79673
Category	Racks & Stands
Language	English