Warn 93901 - Before You Begin; Tools Required

To Next Page

To Previous Page

NOTICE

EQUIPMENT DAMAGE

• Always refer to the Installation and Specication Guide, supplied in the winch kit, for all wiring schematics and specic details on how to wire this WARN product to your vehicle.

• Never overtighten the j-bolt to the bracket. Doing so will pinch the winch cable against the bracket, damaging the cable.

• Always put the end of the actuator cable through the slot in the Termination Bracket. Terminating the cable through any other hole in the bracket will cause the bracket to not

function properly and will drastically reduce the life of the actuator cable.

Read installation and operating instructions thoroughly.

CAUTION

MOVING PARTS ENTANGLEMENT HAZARD

Failure to observe these instructions could lead to minor or moderate injury

• Always take time to fully read and understand the installation and Operations Guide included with this product.

• Never operate this product if you are under 16 years of age.

• Never operate this product when under the inuence of drugs, alcohol or medications.

Read installation and operating instructions thoroughly.

BEFORE YOU BEGIN

TABLE OF CONTENTS

Tools Required ...................................................... page 2