Warn PROVANTAGE 4500-S

To Next Page

Warn Industries, Inc. 89357A1

PROVANTAGE 4500-S

Part Number: 90451, 91046

Rated Line Pull: 4500 lbs. (2041 kgs)

Motor: 12V DC, 1.9 hp (1.4 kW) Permanent Magnet

Controls: Remote and Dash Mounted Lighted Rocker Switch

Gear train: 3-Stage Planetary

Gear Ratio: 154:1

Clutch (Freespool): Sliding Pin and Ring Gear

Brake: Roller Disk

Drum diameter/length: 2.25”/4.7” (57mm/119mm)

Kit Shipping Weight: 28.5 lbs. (12.9 kgs)

Rope: Synthetic, Ø 7/32” x 50’ (Ø 5.5mm x 15.2m)

Fairlead: Hawse

Recommended Battery: 14 AH minimum

Duty Cycle: Intermittent

Battery leads: 6 gauge

Finish: Black Powder Coat

Warranty: Limited Lifetime

Mounting Bolt Pattern: 3.0” x 6.66” (76mm x 169mm)

Winch Dimensions: 14.42” L x 4.51” D x 4.69” H (36.6cm L x 11.5cm D

x 11.9cm H)

Winch Weight: 15.6 lbs. (7.1kgs)

Warn Industries, Inc. 89357A1

PERFORMANCE DATA

Pull by Layer

Layer/lbs. (kgs.)

1/4500 (2041)

2/3349 (1519)

3/2880 (1306)

4/2526 (1146)

Load Current Speed

lbs. (kgs) (Amps) Ft/min. (m/min.)

4500 (2041) 318 2.9 (.9)

3500 (1588) 241.2 5.7 (1.7)

2500 (1134) 175.0 8.4 (2.6)

1500 (680) 113.7 13.7 (4.2)

500 (227) 54.9 18.5 (5.6)

0 19.1 23.6 (7.2)

Load Run Time Distance Cool Time

lbs(kgs) ft.(m) (min)

0 2.5 min 60 (18.3) 12

500 (227) 2.0 min 37 (11.3) 10

1500 (680) 1.0 min 14 (4.3) 10

2500 (1134) 35 sec 5 (1.5) 10

3500 (1588) 15 sec 1.5 (.5) 10

4500 (2041) 10 sec .5 (.2) 10

DUTY CYCLES

Should you encounter a problem during installation or operation of your

winch, please follow these steps toward resolving the problem:

1. Refer to your operator’s guide and installation instructions. It has

illustrations and detailed information on the installation and safe and

proper operation of your winch. It also includes a replacement parts list

and assembly diagrams. If you are unable to resolve the problem, then

go to step 2.

2. Contact your dealer where you purchased your winch. If, after discussing

the problem with their parts and service staff, you are still unable to

resolve the problem then go to step 3.

3. Call an Authorized WARN Service center from the list provided on the

back of the warranty sheet included with the product. When calling,

please have the following information available: winch model number

and purchase date, make, model and year of vehicle.

4. If you are unable to resolve the problem to your satisfaction, please call

Warn Industries Customer Service at: 1-800-543-9276. When calling,

please have the following information available: winch model number

and purchase date, make, model and year of vehicle. You may also

contact Warn Industries by visiting our website: www.warn.com

SERVICE INSTRUCTIONS

Need help?

Do you have a question about the Warn PROVANTAGE 4500-S and is the answer not in the manual?

Summary

PROVANTAGE 4500-S Product Overview

Performance Data

Details winch performance parameters like load, current, speed, and pull-by-layer capacity.

Duty Cycles

Specifies winch operational duty cycles, including run time, distance, and cool time for various loads.

Service Instructions

Guidance on winch installation, operation, and troubleshooting, including contact information for support.

Winch Service and Upgrade Kits

Service;Upgrade Kits

Lists available service and upgrade kits for the winch with their respective part numbers.

Winch Service Kits

Details winch service kits, mapping kit part numbers to the specific components they contain.