7
SECTION 2 – Disassembly & Assembly
2.1 Service Technician Repairs
Failure to observe these instructions could lead to severe injury or death.
READ THIS BEFORE BEGINNING REPAIRS
This manual is intended for use by a WARN authorized service technician. It is
important that you make repairs with the proper tools and equipment. It is also
important to correctly follow the instructions. Failure to do so, may cause the winch
to fail.
2.2 Suggested Tools
The following tools are suggested for these procedures: Hex 3/16 Allen wrench,
Torque wrench, 1/2, 7/16, 3/8, and 5/16 sockets, 3/8 & 7/16 box end wrench, needle
nose pliers, and one flat blade screwdriver.
2.3 Disassembly
Failure to observe these instructions could lead to severe injury or death.
Never lean over battery while making connections
Always disconnect all wires from battery, before beginning work.
Always disconnect negative terminal first and reconnect negative terminal last.
Always remove jewelry and wear eye protection.
To Next Page
Loading...
