7
Series 2800 2800_IOM_RevBa_1219
DIMENSIONS & WEIGHTS
1/2, 3/4, 1 1-1/4 & 1-1/2 2
A 250THD 4-7/8 5-3/4 6-1/2
300THD5 6-1/8 6-1/2
300BWE 15-3/8 16-7/817
B 250THD 2-3/4 3-1/4 3-5/8
300THD & BWE3 3-1/2 3-7/8
C 250THD 2-7/8 3-1/2 3-3/4
300THD & BWE 2-7/8 3-1/2 3-3/4
Dimension (IN)
2820
Weight (LB) 250THD 8-1/2 14-1/2 18-1/2
300THD8 15-1/219
300BWE 9-1/218 22-1/2
* Includes 1-3/8 inch for air fitting on direct acting diaphragm actuators
CF = Consult factory
Face to face dimensions conform to
Historical Warren Controls standard and
are NOT ANSI/ISA compatible.
Dimensions & Weights
2-Way or 3-Way
w/ DL49 or 49XR
2-Way or 3-Way
w/ DL84 or 84XR
Allow 4-7/8 inch clearance above actuator
for removal.
Actual shipping weights may vary.
Valve Size (IN)
1/2, 3/4, 11-1/4 & 1-1/22
A 250THD 4-7/85-3/4 6-1/2
300THD 56-1/8 6-1/2
300BWE 15-3/8 16-7/817
B 250THD 2-23/32 3-13/164
300THD 2-23/32 3-3/8 3-3/4
300 BWE8 8-3/49
C 250THD 2-7/83-1/2 3-3/4
300THD & BWE2-7/8 3-1/23-3/4
Dimension (IN)
2830
Weight (LB) 250THD 9 15-1/220
300THD 815 18-1/2
300BWE 10-1/2 19 23-1/2
Valve Size (IN)
11-1/2 2
A 250THD 4-7/85-3/4 6-1/2
300THD 56-1/8 6-1/2
300BWE 15-3/8 16-7/817
B 250THD 3-15/32 3-13/164
300THD 2-23/32 3-3/8 3-3/4
300 BWE8 8-3/49
C 250THD 2-7/83-1/2 3-3/4
300THD & BWE2-7/8 3-1/23-3/4
Dimension (IN)
2832
Weight (LB) 250THD 9 16-1/221
300THD 816 19-1/2
300BWE 10-1/2 20 24-1/2
Valve Size (IN)
1/2, 3/4, 1
A 250THD 4-7/8
300THD5
300BWE 15-3/8
B 250THD 2-3/4
300THD & BWE3
C 250THD 2-7/8
300THD & BWE 2-7/8
Dimension (IN)
2828
Weight (LB) 250THD 8-1/2
300THD8
300BWE 9-1/2
Valve Size (IN)
8
2600 Emrick Blvd., Bethlehem, PA 18020-8010 www.WarrenControls.com
Te l: 800-922-0085 or 610-317-0800 Fax: 610-317-2989
DL49 Direct 11 6-3/8 12-1/4 16 25 CF
DL49 49XR Reverse 11 6-3/811-1/4 13-3/425CF
DL84 Direct 13-7/88-1/8 16-3/424-1/8 48-1/2CF
DL84 84XR Reverse 13-7/8 8-1/85-3/4 24 48-1/2 CF
Actuator
H MAX (IN) WEIGHT (LB)
HTIWHTIW)ni( d)ni( D
ACTUATOR HANDWHEEL STD* HANDWHEEL STD HANDWHEEL
Top mounted
Handwheel
Valve shown with DL49 Actuator as typical.
For additional actuator information see Series 2800 Product Specification and
the Installation Operation and Maintenance Instructions for the actuator in use.
DIMENSION (IN)
2820
VALVE SIZE (IN)
1/2, 3/4,
1
1-1/4 &
1-1/2
2
A
250THD 4-7/8 5-3/4 6-1/2
300THD 5 6-1/8 6-1/2
300BWE 15-3/8 16-7/8 17
B
250THD 2-3/4 3-1/4 3-5/8
300THD & BWE 3 3-1/2 3-7/8
C
250THD 2-7/8 3-1/2 3-3/4
300THD & BWE 2-7/8 3-1/2 3-3/4
Weight (LB)
250THD 8-1/2 14-1/2 18-1/2
300THD 8 15-1/2 19
300BWE 9-1/2 18 22-1/2
DIMENSION (IN)
2830
VALVE SIZE (IN)
1/2, 3/4, 1 1-1/4 & 1-1/2 2
A
250THD 4-7/8 5-3/4 6-1/2
300THD 5 6-1/8 6-1/2
300BWE 15-3/8 16-7/8 17
B
250THD 2-23/32 3-13/16 4
300THD 2-23/32 3-3/8 3-3/4
300BWE 8 8-3/4 9
C
250THD 2-7/8 3-1/2 3-3/4
300THD & BWE 2-7/8 3-1/2 3-3/4
Weight (LB)
250THD 9 15-1/2 20
300THD 8 15 18-1/2
300BWE 10-1/2 19 23-1/2
DIMENSION (IN)
2828
VALVE
SIZE (IN)
1/2, 3/4, 1
A
250THD 4-7/8
300THD 5
300BWE 15-3/8
B
250THD 2-3/4
300THD & BWE 3
C
250THD 2-7/8
300THD & BWE 2-7/8
Weight (LB)
250THD 8-1/2
300THD 8
300BWE 9-1/2
DIMENSION (IN)
2832
VALVE SIZE (IN)
1 1-1/2 2
A
250THD 4-7/8 5-3/4 6-1/2
300THD 5 6-1/8 6-1/2
300BWE 15-3/8 16-7/8 17
B
250THD 3-15/32 3-13/16 4
300THD 2-23/32 3-3/8 3-3/4
300BWE 8 8-3/4 9
C
250THD 2-7/8 3-1/2 3-3/4
300THD & BWE 2-7/8 3-1/2 3-3/4
Weight (LB)
250THD 9 16-1/2 21
300THD 8 16 19-1/2
300BWE 10-1/2 20 24-1/2
Face to face dimensions conform to Historical
Warren Controls standard and are NOT ANSI/ISA
compatible.
Actual shipping weights may vary.
TRIM
MATERIALS
FLOWING
DIFFERENTIAL
PRESSURE
LIMIT
Bronze 50 PSID
316 Stainless Steel 100 PSID
TFE 100 PSID
PEEK 100 PSID
17-4 pH
Hardened Steel 200 PSID
Alloy 6 300 PSID
Pressure reatings are PSIG
For applications below 32° consult factory.
For applications above 375°, 300THD Stainless
Steel Body is recommended.
BODY PRESSURE-
TEMPERATURE RATINGS:
Temperature
(F)
250 THD
Bronze
300
THD&
BWE SS
+32° To 100°F 400 720
150° 400 670
175° 392 645
200° 385 620
225° 375 605
250° 365 590
275° 350 575
300° 335 560
325° 317 548
350° 300 537
375° 275 526
400° 250 515
450° - 497
500° - 480
To Next Page
Loading...
Need help?
General