To Next PageTo Next Page
Need help?Do you have a question about the Wascomat Super Junior W 105 and is the answer not in the manual?
Detailed technical specifications for the Junior W75 model.
Detailed technical specifications for the Super Junior W105 model.
Detailed technical specifications for the Senior W125 model.
Detailed technical specifications for the Giant W185 model.
Dimensional drawings and measurements for all Wascomat models.
Procedures for preparing and installing the machine's foundation.
Steps for mechanically securing the machine to the foundation.
Guidelines for connecting the machine to the electrical supply.
Instructions for connecting hot and cold water supply lines.
Procedures for connecting the machine's drain hose.
Verifying the proper function of the door lock and interlock.
Final operational tests and checks after installation.
General safety guidelines and precautions for machine operation.
Step-by-step guide for preparing, starting, and finishing a wash cycle.
Steps to sort laundry, empty pockets, and load the machine.
Instructions on selecting programs, adding detergent, and starting the machine.
Procedures for unloading laundry and leaving the machine.
Summary table of the four available wash programs.
Detailed description of the Hot wash program cycle.
Detailed description of the Warm wash program cycle.
Detailed description of the Cold wash program cycle.
Detailed description of the Delicate wash program cycle.
How to modify program parameters using jumper wires.
Adjusting water levels for different wash phases.
Overview of main units and component locations.
Details on outer shell, panels, and inner cylinder construction.
Components and operation of the machine door and locking mechanism.
Description of the wash cycle timer and control components.
Construction and operation of water inlet valves.
Function and adjustment of water level pressure switches.
Description, construction, and function of the drive motor.
Wiring diagrams and measurement points for single-phase motors.
Regular checks to ensure proper operation and safety.
Specific tasks to perform on a weekly basis.
Periodic checks and maintenance tasks every three months.
Information on motor connections and overload protector function.
Steps to diagnose and resolve issues when the machine does not start.
Steps to diagnose and resolve problems with water not draining.
Diagnosing issues with extraction and motor operation at wash speed.
Resolving slow operation, noise, and door leaking problems.
Diagnosing issues with water not entering or glass leaks.
Steps to resolve continuous filling or flow without filling issues.
Steps to diagnose and resolve excessive machine vibration.
General