Wascomat Giant W 185 - User Manual

WARNING: ALL OPERATING AND MAINTENANCE PROCEDURES SHOWN ON THE NEXT
PAGE OF THIS MANUAL MUST BE FOLLOWED DAILY FOR PROPER OPERATION OF
YOUR WASCOMAT MACHINE.
PLEASE ENTER THE FOLLOWING INFORMATION AS IT APPEARS ON THE MACHINE(S)
DATA PLATE(S).
MAKE CERTAIN TO KEEP THIS MANUAL IN A SECURE PLACE FOR FUTURE
REFERENCE.
MACHINE TYPE OR MODEL
MACHINE SERIAL NUMBER(S)
ELECTRICAL CHARACTERISTICS: ________ VOLTS, _______ PHASE, _______ HZ.
OPERATING & MAINTENANCE MANUAL
WASCOMAT JUNIOR W 75
WASCOMAT SUPER JUNIOR W 105
WASCOMAT SENIOR W 125
WASCOMAT GIANT W 185
471 1562-75/04
00.23

Summary

Introduction

Technical Data

Technical Specifications

Detailed specifications for Wascomat models, including dimensions, speed, power, and electrical connections.

Outline and Dimensions

Diagrams and tables showing the physical dimensions and connection points of the machines.

Installation

Machine Foundation

Instructions for preparing and creating a concrete foundation for the machine.

Mechanical Installation

Steps for physically mounting the machine onto the prepared foundation.

Electrical Installation

Guidance on connecting the machine to electrical power sources and overcurrent protection.

Water Connections

Instructions for connecting the machine to hot and cold water supplies.

Drain Connection

Procedures for connecting the machine's drain hose to the waste system.

Door Safety Interlock Check

Procedures for verifying the correct operation of the door lock and safety interlock.

Function Control Check-out List

A checklist for verifying the machine's functions after installation.

Safety Rules

Operating Instructions

Procedure for Use

Step-by-step guide on how to prepare, start, and finish a wash cycle.

Wash Programs

Hot Wash Program

Detailed description of the Hot wash program, including cycle steps and timings.

Warm Wash Program

Detailed description of the Warm wash program, including cycle steps and timings.

Cold Wash Program

Detailed description of the Cold wash program, including cycle steps and timings.

Delicate Wash Program

Detailed description of the Delicate wash program, including cycle steps and timings.

Changing Wash Programs

Mechanical and Electrical Design

General Overview

General overview of the machine's main units and control components.

Machine Construction

Details on the outer shell, panels, and inner cylinder construction of the machine.

Back Gable and Bearing

Description of the back gable and bearing assembly for supporting the inner drum.

Door and Door Lock

Description of the door structure, lock mechanism, operation, and safety interlock.

Control Unit

Description of the wash cycle timer, program selector, relays, and level controls.

Relays

Explanation of the relays used to control the wash/extract motor operation.

Water Level Controls

Description of the pressure switch used for controlling water levels and its adjustment.

Drive Motor

Details on the drive motor, its construction, and functional principles for wash and extraction.

Motor Wiring and Measurements

Wiring diagrams and measurement points for single-phase motors of different models.

Maintenance

Trouble Shooting

Machine Start Issues

Steps to diagnose and resolve issues when the machine fails to start.

Water Drainage Issues

Steps to diagnose and resolve issues related to the machine not draining water.

Wascomat Giant W 185 Specifications

General

Model	Giant W 185
Type	Commercial Washer
Capacity	18.5 kg
Spin Speed	1000 RPM
Power Consumption	4.5 kW